holset turbo's - M42club.com

4banger · 02-05-2010, 05:55 AM

anyone running a hx35 or a hx40 on a m42?

kevins08 · 02-05-2010, 02:50 PM

kevin iz running an hy35 soon.

.....

hx40 will be pretty laggy. if you wanna drag your m42 go for, but id say if you want something to remain responsive on a roadcourse, etc. id go no bigger than hx35. and for low boost setups i would recomend neither.

dvmotorsports · 02-05-2010, 04:54 PM

This guy has an HX40 hybrid

Absolutely Insane

There is a thread around here about it.

4banger · 02-06-2010, 01:29 AM

ive got a hx35 off my truck from when i did a bunch of work and upgraded to a schwitzer s400. the hx35 dosnt have a wastegate and has ugraded hot side prop. boost should come on about 3500 i figure. im thinking the hx35 maybe a bit big for the m10 im building so ive decided to turbo my 4door daily driver

kevins08 · 02-06-2010, 04:23 AM

should be about right... so youll be keeping it internally gated your saying? psi plans?

and i heard the guy with the hybrid is rebuilding due to throttle response/lag issues i believe...

4banger · 02-06-2010, 05:01 AM

we never run wategates bov's or boost controlers on high performance diesel trucks. i supose ill have to do a external gate and use a bov. gas turbo motors are all new to me but i have a fairly good understanding of the system.

ive had hx35's put out upwards of 40psi on a diesel. im shooting for 18-20lbs of boost on the m42. forged internals decompressed pistons. the whole deal.

Bunta · 02-07-2010, 11:27 AM

What size is the hot side?
Im rebuilding a externally gated 12cm HX35 for my car
Split pulse manifold and 44mm tial WG, 50mm BOV

split pulse with the 4 banger is the key.
Use the pulses to your advantage.

Hunter

4banger · 02-07-2010, 04:00 PM

i dont have it infront of me but as far as i rember intake side is 4in and hot side is 4.75xxxin. antrim diesel up in PA did the work on the hx35.

kevins08 · 02-08-2010, 11:25 PM

hotside of the hx is 12cm and the hy is 9. hy is found on the automatics and hx on the manuals.

02-05-2010, 05:55 AM	#1
4banger Advanced Member Join Date: Jan 2010 Location: west virginia Posts: 369	holset turbo's anyone running a hx35 or a hx40 on a m42? __________________ 'NO ONE CAN HEAR YOUR SCREAMS ABOVE 6500 RPM'S"

02-06-2010, 01:29 AM	#4
4banger Advanced Member Join Date: Jan 2010 Location: west virginia Posts: 369	ive got a hx35 off my truck from when i did a bunch of work and upgraded to a schwitzer s400. the hx35 dosnt have a wastegate and has ugraded hot side prop. boost should come on about 3500 i figure. im thinking the hx35 maybe a bit big for the m10 im building so ive decided to turbo my 4door daily driver __________________ 'NO ONE CAN HEAR YOUR SCREAMS ABOVE 6500 RPM'S"

02-06-2010, 05:01 AM	#6
4banger Advanced Member Join Date: Jan 2010 Location: west virginia Posts: 369	we never run wategates bov's or boost controlers on high performance diesel trucks. i supose ill have to do a external gate and use a bov. gas turbo motors are all new to me but i have a fairly good understanding of the system. ive had hx35's put out upwards of 40psi on a diesel. im shooting for 18-20lbs of boost on the m42. forged internals decompressed pistons. the whole deal. __________________ 'NO ONE CAN HEAR YOUR SCREAMS ABOVE 6500 RPM'S"

02-07-2010, 11:27 AM	#7
Bunta Advanced Member Join Date: Mar 2006 Location: Reisterstown, MD Posts: 164	What size is the hot side? Im rebuilding a externally gated 12cm HX35 for my car Split pulse manifold and 44mm tial WG, 50mm BOV split pulse with the 4 banger is the key. Use the pulses to your advantage. Hunter __________________

02-07-2010, 04:00 PM	#8
4banger Advanced Member Join Date: Jan 2010 Location: west virginia Posts: 369	i dont have it infront of me but as far as i rember intake side is 4in and hot side is 4.75xxxin. antrim diesel up in PA did the work on the hx35. __________________ 'NO ONE CAN HEAR YOUR SCREAMS ABOVE 6500 RPM'S"

02-05-2010, 02:50 PM	#2
kevins08 Member Join Date: Sep 2008 Posts: 88	kevin iz running an hy35 soon. ..... hx40 will be pretty laggy. if you wanna drag your m42 go for, but id say if you want something to remain responsive on a roadcourse, etc. id go no bigger than hx35. and for low boost setups i would recomend neither.

02-05-2010, 04:54 PM	#3
dvmotorsports Advanced Member Join Date: Apr 2008 Location: Oahu, HI Posts: 466	This guy has an HX40 hybrid Absolutely Insane There is a thread around here about it.

02-06-2010, 04:23 AM	#5
kevins08 Member Join Date: Sep 2008 Posts: 88	should be about right... so youll be keeping it internally gated your saying? psi plans? and i heard the guy with the hybrid is rebuilding due to throttle response/lag issues i believe...

02-08-2010, 11:25 PM	#9
kevins08 Member Join Date: Sep 2008 Posts: 88	hotside of the hx is 12cm and the hy is 9. hy is found on the automatics and hx on the manuals.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)